missmonster
0
Shopping Cart

Your Total: $0.00

Check Out


SILVER DRAGONCAT MASK

$135.00

This is my last silver Dragoncat mask. Ready to ship!




These masks are cast in polyurethane, hand painted and ready to wear. The eyes are see through but will darken your vision ( please wear in well lit environments) Cannot be worn with glasses. Elastic straps are installed but may have to be replaced or adjusted depending on your personal fit.


- One size fits most. It is a larger mask and can accommodate a variety of facial sizes and shapes but a perfect fit is not guaranteed. Cannot be worn with glasses.

- Please be aware the plastic used for this mask is heat sensitive. Do not leave it out in very hot weather! If it warps, it can be restored to its original shape by applying low heat. Please store out of direct sunlight or heat.




These masks are pieces of art made for light costuming and display. They should never be used in place of safety equipment or as protection. Do notuse this as a welding/metal working mask. Do not use this as a hockey/airsoft/paintball mask.  Use common sense, please. I would not recommend this as a piece to use for any LARP that may result in any blows to the face. I will not be responsible for any injuries sustained through misuse of this product.




By buying this item you acknowledge you have read all the information above and have reviewed the policies!



-This is a fully painted and finished wearable resin mask. Each one is hand painted by the artist, signed and numbered. This is a very small edition of 4 painted like the design shown. Your mask will include an authentication sticker on the inside and will come with a cotton bag for storage or travel. 


-The masks are clear coated to prevent the paint scuffing but please treat it with some care. Wipe any dirt  or smudges with a slightly damp cloth.


-Your mask includes adjustable sliding elastic straps with loops attached to the mask itself in case you prefer to replace with your own straps. It will also have foam padding on the inside for a better fit and comfort.


- Display/store in a cool place out of direct sun or extreme heat. I recommend hanging it on a wall by the top loop. The plastic used for this mask is heat sensitive.


- There will be slight variations between each mask due to the hand made nature.







-ONE SIZE FITS MOST:


 This mask can accommodate a variety of facial sizes and shapes but a perfect fit is not guaranteed. You may have to expand the mask for a better fit. You can do so using heat. 


-Warm the back of the mask with a hair dryer or on warm on VERY low temp in your home oven ( place on cookie sheet and on a supportive bowl or cookware so the mask does not warp under it's own weight) 


- Only heat for around 5 minutes. 


-Gently pull the mask sides apart while warm until you get the fit you want. Let the mask cool to set the shape.



 The plastic used for this mask is heat sensitive meaning it is prone to mild warping in hot weather if not properly stored.  Do not leave it out in very hot weather! If it warps, it can be restored to its original shape by applying low heat as mentioned above.  




These masks are pieces of art made for light costuming and display. They should never be used in place of safety equipment or as protection. Do notuse this as a welding/metal working mask. Do not use this as a hockey/airsoft/paintball mask.  Use common sense, please. I would not recommend this as a piece to use for any LARP that may result in any blows to the face. I will not be responsible for any injuries sustained through misuse of this product.

-This is a fully painted and finished wearable resin mask. Each one is hand painted by the artist, signed and numbered. This is a very small edition of 4 painted like the design shown. Your mask will include an authentication sticker on the inside and will come with a cotton bag for storage or travel. 


-The masks are clear coated to prevent the paint scuffing but please treat it with some care. Wipe any dirt  or smudges with a slightly damp cloth.


-Your mask includes adjustable sliding elastic straps with loops attached to the mask itself in case you prefer to replace with your own straps. It will also have foam padding on the inside for a better fit and comfort.


- Display/store in a cool place out of direct sun or extreme heat. I recommend hanging it on a wall by the top loop. The plastic used for this mask is heat sensitive.


- There will be slight variations between each mask due to the hand made nature.







-ONE SIZE FITS MOST:


 This mask can accommodate a variety of facial sizes and shapes but a perfect fit is not guaranteed. You may have to expand the mask for a better fit. You can do so using heat. 


-Warm the back of the mask with a hair dryer or on warm on VERY low temp in your home oven ( place on cookie sheet and on a supportive bowl or cookware so the mask does not warp under it's own weight) 


- Only heat for around 5 minutes. 


-Gently pull the mask sides apart while warm until you get the fit you want. Let the mask cool to set the shape.



 The plastic used for this mask is heat sensitive meaning it is prone to mild warping in hot weather if not properly stored.  Do not leave it out in very hot weather! If it warps, it can be restored to its original shape by applying low heat as mentioned above.  




These masks are pieces of art made for light costuming and display. They should never be used in place of safety equipment or as protection. Do notuse this as a welding/metal working mask. Do not use this as a hockey/airsoft/paintball mask.  Use common sense, please. I would not recommend this as a piece to use for any LARP that may result in any blows to the face. I will not be responsible for any injuries sustained through misuse of this product.

Sold Out

SILVER DRAGONCAT MASK
Product Images (click to enlarge)
  • SILVER DRAGONCAT MASK
  • SILVER DRAGONCAT MASK
  • SILVER DRAGONCAT MASK
  • SILVER DRAGONCAT MASK
  • SILVER DRAGONCAT MASK
  • SILVER DRAGONCAT MASK
  • SILVER DRAGONCAT MASK