COLOR SHIFT FLEXIBLE SPIKE ARMOR PANEL

6" x 4.5" flexible urethane with color shifting surface. The color shift effect is infused with the urethane and will not easily rub off. They can take acrylic paint but it will bead off if too watered down.

You will get one of the panels pictured!

The lower priced imperfect panels have minor issues like one spike with a bubble in the tip, a small piece of color missing making a tiny black spot or a bubble on a spike detail. They are otherwise very useable!

You can sew these panels onto fabric by making sew holes with an awl and using a thick curved needle with sturdy thread. I have been using Ure-Bond to glue this onto fabrics with great results! I pin the armor on over the fabric while draped over my dummy torso with T- pins or clamp on while the adhesive cures. It doesn't take other glues too well unfortunately. The backs will be unsanded and glossy, I recommend sanding the back with rough sandpaper ( a belt sander works really well!) before attempting to glue them.

You can stack and arrange them in really cool patterns! The panels will flex without tearing but keep in mind they are not indestructible.

If you would like to thin out the panel to make it more flexible, use a belt sander to gently grind down the back. Be careful as the rubber texture likes to catch on the belt, go slowly and sand one half at a time.