Regular price
$120.00
Sale price
$0.00
Unit price/per
This is a one of a kind blank cast of my owl mask. It is cast in glow in the dark ( purple) urethane with beautiful iridescent foil and sparkles embedded into it. Buyer will need to paint the back of the mask to make it not see through if desired. Ready to ship!
- These are produced one at a time in my own studio. The buyer will need to sand/remove the flash edges, fill any small surface air bubbles, reinforce areas and heat to shape the mask to fit their own face if needed.
- I recommend using a strip of vertical foam between the eyes and up the forehead to fill out the back of the mask so it sits on your head properly. Otherwise if you use the black out cloth your eyes will be mushed against the back of the cloth and won't be super fun.
- Elastic straps can be attached with high heat hot glue, epoxy or other strong adhesive. Clamp while curing /drying to secure the bond better. Score ( roughen) the mask's surface before gluing.
- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer can add soft cloth lining to the inside for comfort. Some craft/paint/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided.
- Please do not buy a mask if any of the above is an issue!
- This is not a piece of safety equipment, this is a wearable prop. Please use common sense.
- This mask can be primed with any spray primer ( auto or otherwise) and painted with acrylics or whatever you prefer. Seal with clear coat to prevent scuffs after painting.
- This urethane is sensitive to heat. Please keep it out of direct sunlight as it can warp under it's own weight when hot.
-If the mask does not fit, It can be heat shaped by immersing it in very hot water and shaping gently while soft. You can also use a heat gun or heat in the oven at around 175 degrees for a few minutes. Set the shape you want by immersing the warm mask in cold water or leaving on an upturned bowl or object to hold the shape while it cools.
- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.
-This mask fits most faces but a perfect fit is not guaranteed.
- Do not use this as safety equipment or a welding mask or anything else but costuming. Please don't make dumb choices with this. I am not responsible for injuries sustained through improper use of this mask.
TERMS OF USE:
I realize that i cannot control what people do with my masks but i can at least state some boundaries:
-Feel free to resell blank masks you purchased from me that you have painted and finished ! Feel free to resell any finished masks you have purchased from me. Charge whatever you want, if you make a profit that's great. I only ask for the courtesy of crediting me for the original sculpt in the posting or store listing.
-If you use a mask base of mine for a portfolio piece posted online or in print for your professional individual or company promotion i must insist that i get a courtesy credit for the base sculpt. Hobby is one thing, but company/pros are another- crediting others is a basic professional courtesy.
-Please do not recast these or remake/mimic my current or older designs for your own profit.
-Feel free to create original characters around my mask designs! Make art of them, go for it! I would love to see the artwork! :)
By purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.
choosing a selection results in a full page refresh
