missmonster

DIY KITSUNE MASK- CUT OR RAW CAST

$50.00

LIMITED EDITION: Once this page reads "sold out" this version of this mask design will not be available. Please do not message to ask for an exception as it will not be answered. I am not open for commissions.

Ready to ship!

I will do my best to get them all shipped before Christmas. This is not a guarantee that they will arrive before Christmas, esp with international orders. Please keep in mind these need to be wrapped and packed properly to make sure they arrive undamaged. The volume of orders these masks tend to get makes this a very time consuming process. Please be patient!

Please read everything below carefully:

-This is a BLANK DIY (DO IT YOURSELF) resin mask. It can be painted with acrylics, added to with epoxy clay or whatever preferred material, sanded, cut and otherwise modified to fit your personal tastes. Attach elastic straps and it can be worn or just displayed on the wall as an art piece.

Please choose between a CUT DIY or RAW CAST DIY:

- RAW CAST DIY means it's pulled from the mold and sent as is. No drilled eyes or flash edge trimming. Clean up and dremel work will be the customers responsibility hence the lower price... less work for me. Unpainted blank resin mask.

-CUT DIY means the mask's eyes are drilled open and the edges have been smoothed. Some pinhole filling and finishing may be required but its basically ready to paint. Unpainted blank resin mask.

------

Tips:

- The backs of the ears are open due to the mold style and can be filled with free form epoxy putty from smooth-on or any other light weight material if you want them to have a "closed" effect.

- I use flat elastic bands with bras strap slides for an adjustable fit ( not included ) Epoxy or high heat hot glue can be used to attach the straps to the mask, score the resin surface first with a utility knife.

-You may want to brush some rubbing alcohol on the mask before painting. This will get rid of any lingering mold release that can make painting difficult. Applying a spray primer will also help paint stick to the surface better.

-Please do not purchase this item if you are unsure of what to do to finish it. I can not personally assist buyers with this project.

-ONE SIZE FITS MOST:

**This mask can accommodate a variety of facial sizes and shapes but a perfect fit is not guaranteed. You may have to expand the mask for a better fit. You can do so using heat.**

-Warm the plastic with a hair dryer or on VERY low temp in your home oven ( place on cookie sheet and on a supportive bowl or cookware so the mask does not warp under it's own weight)

- Only heat for around 5 minutes.

-Gently pull the mask sides apart while warm until you get the fit you want. Let the mask cool to set the shape.

- Once you get the shape you want you can reinforce the inside of the mask with a thin layer of Free-Form putty or other lightweight epoxy putty ( ask for wood filler putty at the hardware store)

Since the plastic used for this mask is heat sensitive meaning it is prone to mild warping. Do not leave it out in very hot weather! If it warps, it can be restored to its original shape by applying low heat as mentioned above. Store face up on a supportive structure underneath ( rolled up shirt or fabric works well ) or even better ....hang from your wall!

These masks are pieces of art made for light costuming and display. They should never be used in place of safety equipment or as protection. Do notuse this as a welding/metal working mask. Do not use this as a hockey/airsoft/paintball mask. Use common sense, please. I would not recommend this as a piece to use for any LARP that may result in any blows to the face. I will not be responsible for any injuries sustained through misuse of this product.

By buying this item you acknowledge you have read all the information above and have reviewed the policies!

I always post on the SHOP UPDATE page if there are ever any delays, store issues or news about what's coming up.

**This mask can accommodate a variety of facial sizes and shapes but a perfect fit is not guaranteed. You may have to expand the mask for a better fit. You can do so using heat.**

-Warm the plastic with a hair dryer or on VERY low temp in your home oven ( place on cookie sheet and on a supportive bowl or cookware so the mask does not warp under it's own weight)

- Only heat for around 5 minutes.

-Gently pull the mask sides apart while warm until you get the fit you want. Let the mask cool to set the shape.

DIY KITSUNE MASK- CUT OR RAW CAST

LIMITED EDITION: Once this page reads "sold out" this version of this mask design will not be available. Please do not message to ask for an exception as it will not be answered. I am not open for commissions.

Ready to ship!

Please read everything below carefully:

-This is a BLANK DIY (DO IT YOURSELF) resin mask. It can be painted with acrylics, added to with epoxy clay or whatever preferred material, sanded, cut and otherwise modified to fit your personal tastes. Attach elastic straps and it can be worn or just displayed on the wall as an art piece.

Please choose between a CUT DIY or RAW CAST DIY:

- RAW CAST DIY means it's pulled from the mold and sent as is. No drilled eyes or flash edge trimming. Clean up and dremel work will be the customers responsibility hence the lower price... less work for me. Unpainted blank resin mask.

-CUT DIY means the mask's eyes are drilled open and the edges have been smoothed. Some pinhole filling and finishing may be required but its basically ready to paint. Unpainted blank resin mask.

Tips:

- The backs of the ears are open due to the mold style and can be filled with free form epoxy putty from smooth-on or any other light weight material if you want them to have a "closed" effect.

- I use flat elastic bands with bras strap slides for an adjustable fit ( not included ) Epoxy or high heat hot glue can be used to attach the straps to the mask, score the resin surface first with a utility knife.

-You may want to brush some rubbing alcohol on the mask before painting. This will get rid of any lingering mold release that can make painting difficult. Applying a spray primer will also help paint stick to the surface better.

-Please do not purchase this item if you are unsure of what to do to finish it. I can not personally assist buyers with this project.

-ONE SIZE FITS MOST:

This mask can accommodate a variety of facial sizes and shapes but a perfect fit is not guaranteed. You may have to expand the mask for a better fit. You can do so using heat.

-Warm the plastic with a hair dryer or on VERY low temp in your home oven ( place on cookie sheet and on a supportive bowl or cookware so the mask does not warp under it's own weight)

- Only heat for around 5 minutes.

-Gently pull the mask sides apart while warm until you get the fit you want. Let the mask cool to set the shape.

- Once you get the shape you want you can reinforce the inside of the mask with a thin layer of Free-Form putty or other lightweight epoxy putty ( ask for wood filler putty at the hardware store)

By buying this item you acknowledge you have read all the information above and have reviewed the policies!

I always post on the SHOP UPDATE page if there are ever any delays, store issues or news about what's coming up.

This mask can accommodate a variety of facial sizes and shapes but a perfect fit is not guaranteed. You may have to expand the mask for a better fit. You can do so using heat.

-Warm the plastic with a hair dryer or on VERY low temp in your home oven ( place on cookie sheet and on a supportive bowl or cookware so the mask does not warp under it's own weight)

- Only heat for around 5 minutes.

-Gently pull the mask sides apart while warm until you get the fit you want. Let the mask cool to set the shape.

**This mask can accommodate a variety of facial sizes and shapes but a perfect fit is not guaranteed. You may have to expand the mask for a better fit. You can do so using heat.**

**This mask can accommodate a variety of facial sizes and shapes but a perfect fit is not guaranteed. You may have to expand the mask for a better fit. You can do so using heat.**